Cool Touch Blog: Posts Tagged ‘Wittman’

Air Conditioning FAQs: How Do I Determine the Cooling Capacity of My Central AC or Heat Pump System?

Monday, June 18th, 2012

For any type of air conditioning system in Phoenix, the cooling capacity is measured in BTU’s. This is important to know if the system doesn’t seem to be adequately cooking your home, and there are many different ways to check the cooling capacity of your AC system.

1. Air Conditioning System’s Age and Serial Numbers

An air conditioner’s age will usually give you a general idea for its cooling capacity, and if you aren’t sure, you can always check the serial number. Because serial number formats vary by the year the equipment was made, you can check to see how old an air conditioner is from looking at the serial number.

The first four digits of every serial number is the week and year the unit was manufactured.  For example, the serial# 1188E53294 on a compressor unit tells us that it was made between 1980 and 1990, and to be more exact, week 11 in 1988.

2. Air Conditioner’s Model Number

You should also look at the model number for your specific model because some manufacturers also vary how they assign each number in the serial number; however, they usually stand for tonnage or MBTUH. You can always call us if you aren’t sure how to read the serial number or model number.

3. AC Equipment’s RLA Numbers

RLA stands for “Rated Load Amps,” which means that it’s the manufacturer’s rate of the cooling capacity (also known as the draw) or load while it’s operating (minus the draw when you start the system). Most air conditioning compressor or condenser units will draw 5 to 6 RLA per ton of cooling capacity. You can check the data tag on the compressor for the RLA rating; however, this will need to be translated into BTUH for the total cooling capacity.

Feel free to call one of the Phoenix air conditioning experts at Cool Touch if you have any questions how to calculate your AC system’s cooling capacity.

Continue Reading

Indoor and Outdoor AC Components Should Be Replaced at the Same Time in Peoria

Tuesday, May 29th, 2012

Does one of your ductless air conditioner components need replacing? If so, you are probably tempted to just replace whichever unit is failing in order to fix the problem quickly and cheaply. This is not always the best way to go, however. Here are six reasons why you should replace both the indoor and outdoor units at the same time.

#1: Cost

Although replacing just the failing component – whether indoor or outdoor – will be less expensive up front, that choice often proves more costly overall. You will see just what that means in the rest of these reasons.

#2: Advances in design

Heating and cooling technology is always advancing, so since you purchased your AC system, the products on the market have gotten quieter, more efficient and better overall. By replacing just the failing indoor component, you won’t reap all the benefits of this new technology, as the older outdoor component will still lag behind the times.

#3: Higher efficiency

When both units are replaced at the same time, and with models that have the same technology, they work together more efficiently. That means more savings on your bills and a more comfortable home.

#4: Matched system

Split AC systems are designed such that the indoor units are engineered to work best with a matching outdoor unit. When the system is matched, you get optimum performance and efficiency. By replacing just one component, you lose the benefits of that matching, meaning degraded efficiency and performance.

#5: Warranty considerations

A new system means new warranty coverage. Replacing both units at once means a whole new warranty that covers your whole cooling system, so you won’t have to worry about paying for any more replacements jobs for a long time.

#6: Wear and tear

Finally, think about the wear and tear your air conditioning system has undergone since it was installed. Maybe only your outdoor unit needs to be replaced now, but since your indoor unit has tolerated the same number of hours of use, it may be on its way out sooner than later. It’s like when you buy new tires for your car– you don’t buy one or two, you buy a whole set of four so that the whole system starts fresh. That way you only do it once, and not again in six months or a year.

For all these reasons, replacing both components of a split system is often the best and least expensive route to choose when facing a replacement.  For help with air conditioning replacements please call Cool Touch Air Conditioning & Heating Specialists.

Continue Reading