Cool Touch Blog: Posts Tagged ‘heater installation phoenix’

Heating System Maintenance Saves

Monday, September 30th, 2013

Just when you get through one hot summer and start thinking “thank God that’s over”….BAM, the cold winter nights hit you right between the eyes and your heater system fails.

Here at Cool Touch, there’s not one little thing we can do to brighten a cold Phoenix forecast.  We can, however, make all the extra time you spend indoors that much more relaxing and stress free:  and that’s with our home heating tune-up and inspection service.

Why You Need Cool Touch Home Heating Maintenance?

Since the average heating system lifespan is about 10-12 years, it needs all the help it can get  to perform at its best.

Even if your system is relatively new, it still needs its annual check-up to continue to perform at the top of its game.

What Benefits Does a Cool Touch System Tune-up Provide?

With our multi-point heating system tune-up and inspection, you’ll benefit in four major ways:

  • Fewer repairs
  • Improved safety
  • Longer system lifespan
  • Lower utility costs

During our tune-up checks, we’ll clean or, most likely, replace the filter and that means cleaner indoor air.  When the system fan is blowing against a dirty filter, dust, bacteria, mold, chemicals, and other contaminants are forced through your air ducts, into your living space, and into your lungs

We have other indoor air quality solutions we can tell you about, as well.

What Does a Cool Touch Heating System Tune-up Consist of?

We maintain and repair all makes and models of home heating systems.  During our annual tune-up and inspection, these are just a few of the critical steps in the process:

– We will check and clean the burners and heat exchanger, replace any dirty filters, lubricate the blower fan motor bearings and check the electrical connections throughout the system.

– We will check the ductwork and closely inspect the air handler and chimney flue to make sure they are working properly as well.

– Test for carbon monoxide leaks

– Check furnace filter

– Check ignition and firing

– Test for gas leaks

The entire process takes no more than 2–3 hours, but when done properly on an annual basis, it ensures that your system is in good working order for a long time to come and that you will get your money’s worth whenever you turn on that furnace each winter.

For a nice and steady winter season, instead of one with lots of ups and downs, contact Cool Touch today to schedule annual heating system maintenance.

 

Continue Reading